YOU SAID
instead of tiling a bathroom, can I use this product for wall-coverage?

OUR EXPERT SAID
You can use Aqua Board as you would any other plasterboard product. If you do not want to tile then it should be sealed with a bathroom paint. Would still recommend Tiling arond showers and above bath.

YOU SAID
what lights for kitchen

OUR EXPERT SAID
You will have to contact a lighting supplier, as we only make Board products - Sorry

YOU SAID
What do you use for filling joints in aqua board

OUR EXPERT SAID
For internal use. GTEC Aquamix with patch tape is recommended.

YOU SAID
can i use the board on an out side wall and apply render ?

OUR EXPERT SAID
GTEC Aqua Board can be used as the exterior lining & only rendered if an Insulated render system is used. We do not advise direct render at this point in time.

YOU SAID
can the board be fixed directly onto brickwork

OUR EXPERT SAID
We do not recommend direct bond application. fixing to battens or dryliner channels is the preffered option.

YOU SAID
can you put cerimic tile on aqua board

OUR EXPERT SAID
Yes you can tile directly onto GTEC Aqua Board with waterproof tile adhesives.

YOU SAID
can you plaster on aqua panel

OUR EXPERT SAID
We dont recommend you plaster aqua board as the surface is water resistant and the plaster finish is not. We recommend the board is taped and jointed and sealed before decoration.

YOU SAID
can i use it in walls + floor of a wet room ?

OUR EXPERT SAID
GTEC Aqua Board can be used on walls and ceilings, but is not recommended for floors.

YOU SAID
can i use it in walls of a wet room ?

OUR EXPERT SAID
Yes. GTEC Aqua Board has been specifically designed for use in such areas. The board can be tiled or paint finished.

YOU SAID
what does it cost

OUR EXPERT SAID
The price can vary depending on the size of the board and the stockist. The small 850mm wide board can range from between £10 and £12 a sheet. GTEC Aqua Board is available from a number of regional and national merchants / distributors and a list can be found on this web site.



YOU SAID
What's the thickness of aqua board

OUR EXPERT SAID
GTEC Aqua Board is 12.5mm thick and is available in 1200 x 2400, 1200x2700 & 1200x850

YOU SAID
does auqa board act as a vapour barrier

OUR EXPERT SAID
No - you would need to use a seperate vapour barrier our we can bond one to the board for you.

YOU SAID
can aquaboard be dot and dabbed onto a brick or block wall

OUR EXPERT SAID
We do not recommend that Aqua Board is Direct boned to walls, we would suggest the dryliner system and mechanical fix.

YOU SAID
Is it made from plaster board and does it look the same

OUR EXPERT SAID
It is similar to plasterboard but with a tissue facing and that little something in the core to slow the uptake of water, It is also mould resistant.

YOU SAID
i need somethinc for a waterproof balcony floor

OUR EXPERT SAID
Would not recommend for this use

YOU SAID
Can traventine tiles be fixed directly onto aquaboard, or does the board need to be skimmed with plaster before the tiles are fixed? regards David

OUR EXPERT SAID
Traventine tiles can be fixed directly to GTEC Aqua Board with waterproof tile adhesive. Provided the tile weight does not exceed 32kg/m2. This would be 11mm of Granit or 13mm of Marble approx

YOU SAID
CAN I RENDER ON THIS BOARD IF I CLADDED AND INSULATED THE BUILDING?

OUR EXPERT SAID
GTEC Aqua board has a BBA certificate for insulated render systems. It can be used as the carrier board for the insulation and the insulation has the render system applied to it.


YOU SAID
Can I skim aqua board?

OUR EXPERT SAID
Yes you can but boards needs to be treated with PVA, although skimming is not recommended for wet areas.

YOU SAID
tile adhesive required

OUR EXPERT SAID
Wall tile adhesives should be waterproof and conform to BS EN 12004


YOU SAID
I want to know more about this amazing product?

OUR EXPERT SAID
If you take a look at our about us page - http://www.lafarge-aquaboard.com/about.aspx you will find out all you need to know about our product